Remco 7 GPM 100 PSI Demand Pump Softwash Roof Wash Pump 1/2" FPT SPARK PLUGS liquid transfer

liquid transfer

***Supply/suction hose inner diameter (ID) should be doubled compared to the pump inlet/suction port

Each desired angle remains stationary until adjusted

The unloader is set at a spike pressure of 200 PSI above the operating pressure of the pump and is meant to be left alone

Remco 7 GPM 100 PSI Demand Pump Softwash Roof Wash Pump 1/2" FPT SPARK PLUGS liquid transferDo not use Teflon tape on this pump. No warranty on this pump. 8 gauge wire must be used. No alligator clips used with this pump. Use a minimum 875 CCA deep cycle marine battery. Tested at the factory and will have water in the pump Please choose UPS FedEx to ship this product. We will not use USPS. Thank you. Remco 7 gpm 100 psi on demand should be powered by a deep cycle marine battery. We recommend using 8 gauge wire, a 30 amp waterproof switch and