Raspberry Pi Compute Module 4 IO Board _RPI_Christmas 2024 – We've updated this

2024 – We've updated this PCB with a new EYESPI connector along with the Adafruit Pinguin to make a lovely and legible silkscreen

Extremely fast and very low propagation delay Flip-Flops are added on I2s signals output from FPGA

The 1000 version comes with a 2-pin terminal block so you can solder it to the output spot where the USB jack would go

The fan then speeds up as the temperature increases (around every additional 5 degrees)

Raspberry Pi Compute Module 4 IO Board _RPI_Christmas 2024 – We've updated thisExposing every interface from Raspberry Pi Compute Module 4 (not included), the Compute Module 4 IO Board provides a development platform and reference base board design for the most powerful Compute Module yet! Compute Module 4 is not included. Specifications External power connector (+12V, +5V) As per the datasheet, power needs can vary but 9W it is recommended to budget for 9W, so a 2A 12V PSU will be fine for most users, or grab a 5A power supply