CMT 226.048.10 Metal & Steel Dry Cut Saw Blade 10" x 5/8" T48 FWF Drop-In (DIAB) Internally Threaded Anchor ATB 15-degree tooth geometry and

ATB 15-degree tooth geometry and negative hook angle deliver fine

The JTM-1 features an internal coolant tank built directly into the base

What hardware is required to install the 1212HL

What drive type do these bits use

CMT 226.048.10 Metal & Steel Dry Cut Saw Blade 10" x 5/8" T48 FWF Drop-In (DIAB) Internally Threaded Anchor ATB 15-degree tooth geometry andThe CMT 10 inch Metal and Steel Dry Cut Saw Blade cuts channels, studs, angles, pipes, rods, and conduit cleanly without coolant. Produces cuts that are cool to the touch with no burrs or heat affected zones. SPECIFICATIONS Diameter 10" (254mm) Number of Teeth 48 Bore Diameter 1" (also fits 5 8") Tooth Grind Type Flat with Alternate Chamfer (FWF) 8 degrees Kerf Thickness 0. 087" Plate Thickness 0. 071" Hook Angle 0 degrees Maximum RPM 3,000 Coating